原理
空气经过过滤和加热，进入干燥顶部空气分配器，热空气呈螺旋状均匀地进入干燥室。料液经塔体顶部的高速离心雾化器(旋转)喷雾成极细微的雾状液珠，与热空气并流接触，在极短的时间内可干燥为成品。成品连续地由干燥底部和旋风分离器中输出，废气由风机排空。
Principle
After being filtered and heated, the air enters the air distributor at the top. The hot air evenly enters the drying chamber in a helical form. The liquid materials are sprayed into micro-fine fog droplets through the spraying of high-speed centrifugal atomizer (rotation) at the top of the tower. Then they contact the hot air concurrently and are dried into finished products in a short time. The finished products will be discharged from the bottom of the drying unit and cyclone separator, while the exhaust gas will be discharged by the fan.
特点
干燥速度快，料液经雾化后，表面积大大增加，在热风气流中，瞬间可蒸发95-98%的水份，完成干燥时间仅需数秒钟，特别适用于热敏性物料的干燥。
产品具有良好的均匀度、流动性和溶解性、产品纯度高，质量好。
生产具有良好的均匀度、流动性和溶解性、产品纯度高，质量好。
生产过程简化，操作控制方便。对于湿含量40-60%(特殊物料可达90%)的液体能一次干燥成粉粒产品，干燥后不需粉碎和筛选，减少生产工序，提高产品纯度。对产品粒径、松密度、水份，在一定范围内通过改变操作条件进行调整，控制和管理都很方便。
Features
Drying is fast. Liquid materials are atomized with surface area greatly increased in the hot air so that 95%-98% of moisture can be evaporated instantaneously. The drying will be completed in a few seconds, which makes it especially suitable for drying heat sensitive materials.
The products are of high purity and good quality thanks to their good uniformity, mobility and solubility.
The production process is simplified and operation and control made convenient.
The production process is simplified and the operation is convenient. Liquids with moisture of 40-60% (for special materials up to 90%) can be dried easily into powder products without thee need of crushing or screening. The production processes are reduced and the product purity improved. The product size, bulk density and moisture can be adjusted in a certain range by changing the operating conditions and management is very convenient.
