Product introduction:
Calcination is modified, purification, decomposition, oxidation, reduction, chemical process, materials in the process of calcination in static and dynamic movement, calcined material when the bigger the specific surface area, the faster the heat transfer, the shorter the calcination time.Dynamic calcination cyclone is after mixing powder material and the heat of the hot air heat flow form reached the surface heat transfer than the biggest moment calcination, is to ensure that sufficient heat, decomposition, new process equipment to improve product quality.Spin flash dryer is my factory in fluidized bed, the swirl, broken and so on technology, on the basis of absorbing the domestic and foreign advanced technology and access to relevant information, self-developed design, this machine has the reasonable design, compact structure, novel, used in paints, dyes, chemical, pesticide, fertilizer, feed, pharmaceutical, electronics and other industries, to achieve efficient fast, energy saving, small equipment production, the purpose of continuous operation
Second, features:
1, because the material is centrifugal, shear, impact, friction and the particles are highly fragmented and gas-solid relative speed between the larger, to strengthen the heat transfer, mass transfer make the machine production of high strength.
2, dry gas enters into the bottom of drying chamber, and produces strong rotating airflow, the material to the wall of an intense feeling of washed out effect, eliminate the phenomenon of the wall.
3, high temperature at the bottom of the dryer, thermal sensitive material does not contact with heat surface directly, solves coking and discoloring problem of thermal sensitive material.
4, eddy piece in drying chamber, in order to control the material moisture at extremely low levels.


5, continuous operation, temperature controllable, gas-solid mixing fully, product quality is stable. 
6, rapid calcination, no burnt products, is conducive to active products. 
7, the system is closed, the environment pollution-free, high recovery rate, civilized production. 
8, combustion exhaust gas can be equipped with cooler, drier system combination, and effective utilization of heat energy. 
9, configuration, exhaust gas recycling system, exhaust gas treatment and can be use
10, 500-1200 ℃ calcination furnace heating air temperature
11, the material granularity < 60 mesh. 
12, the combustion of fuel, solid (coal), gas (gas, natural gas), liquid (diesel oil, heavy oil). 
13, burning method: indirect and direct combustion, inside and outside.
The industrial application of calcining kiln
Widely used in chemical industry, building materials, mining and other industries, the following is a typical example
chemical
Lithium magnesium oxide, zinc, iron, cobalt, nickel, aluminum, such as hydroxyl, rare earth oxide, barite, cryolite, aluminum fluoride, vanadium pentoxide, manganese sulfate, soda ash, etc
Building materials mining
Boric magnesium ore, half water gypsum, kaolin, brucite, calcium carbonate, molybdenum trioxide, fluorspar powder, magnesite, etc